Pressure Solar Water Heating
1.Capacity:100-300 litre
2.Certificate:CE,ISO9001,CCC
3.25,000Sets/Month
4.3 Years Warranty
Port: Shanghai/Ningbo
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 25,000 Set/Sets per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: Sample :Wood Packing, Order :Hard Paper
Delivery Detail: 7-20 Days
Pressure Solar Water Heating
Work Principle of Pressure Solar Water Heater
1. Solar energy is absorbed by the vacuum tubes, then it is transferred to the heat-pipe through the aluminum fin.
2. Heated by the energy, the medium in the heat-pipe transfers the heat energy to the condenser zone of the heat-pipe.
3. The condenser zone of the heat-pipe is inserted to the copper sleeves which are distributed on the water pipe averagely.
4. When water or other medium in the water pipe flows across the copper sleeves, they would bring the energy and be heated.
5. The heated water or other medium makes water in the tank hotter and hotter by walking across the coils in the tank.
Features:
1) High Efficient: Advanced heat transferring style of heat pipes, excellent selective aborbant caoting, perfectly combined with high vacuum heat preservation.
2) Module design, arbitrary combination, harmony with the building perfectly;
Intelligent control and automatic operation;
3) Anti-Freeze: No water inside the tubes when it works, so no freeze.
4) The controller of solar water heater system has anti-freezing function, the circulation will operate while it reaches the fixed temperature.
5) Multifunction: Bathing, washing, domestic heating etc;
6) Energy Saving and Environment Friendly: Taking advantage of solar energy, free of charge, and no pollution
7) Stable and Reliable Performance, Well Wind Resistance
8)All Weather Hot Water Supply:Equiped with auxiliary electrical heating device,supplying enough hot water during bad weather days
Description | Pressure Solar Water Heater |
Material of out tank | 0.4mm thickness SUS304-BA Stainless Steel |
Material of inner tank | Food grade 1.2mm thickness SUS304-2B Stainless Steel |
Tank insulating layer | 55mm high-density polyurethane foam |
Inlet and outlet hole | Male G 1/2, 3/4 |
Heat Pipe | TU Copper |
Material of Vacuum tube | 3.3 Borosilicate glass |
Vacuum tube coating | Cr-Al-N/Al/Cu (three target type) |
Heat exchanging coil | Copper 12mm diameter, 1.0mm thickness |
Absorption | As=0.93-0.96(AM1.5) |
Emission ratio | Ε h=0.04-0.06(80C± 5C) |
Idle sunning property parameters | Y=220~260m2. C/KW |
Average heat loss coefficient | ULT=0.6~0.7W/(m2. C) |
Bracket: | Galvanized steel : thickness 1.5mm |
welding: | Argon arc welding |
fastening pieces: | Made of stainless steel screw |
Max Pressure | 0.6 MPa(6 bar) |