Ozone Disinfection Machine Air Purifier,
*Effective area:large to 300m2,
*Kill bacteria,remove odor, cigarette,
*Portable.
Port: TianJin
Minimum Order Quantity: 1 Unit/Units Flxiable
Supply Ability: 5000 Unit/Units per Month Flxiable
Payment Terms: L/C,T/T,Paypal
Contact SupplierPackaging Detail: plain box
Delivery Detail: 10~15days after confirmation
Ozone Disinfection Machine Portable Purifier For high output use
This product is customized according to the assigned effective area and volume.So the price will change with the difference of specification. Please consult for detailed information when buying..
Model | YL-S3500 | Input Power | AC220V/50Hz |
Working Power | 3.0~3.5KV | Working Frenquency | 8~10KV |
Nominal Power | 45W | Ozone output | 1-3.5g/h |
Ozone Density | 8~10mg/L | Effective Area | ≤300m2 |
Material | 304stainless | Dimension | 350x130x150mm |
1. Ozone generator and control board are installed into one box type.body.
2. Out electrical pole is made of stainless and crystal used as medium. The discharge chamber is wholly sealed and it`s safe to operate.
3. PSU(Power Supply Unit) is this model product`s core technique including frequency conversion and boost converter. It applies soft start that can make high load capacity and multi-protection with high efficiency and stability.
4. This product should work with a clean air intake.
5. Discharge chamber is cooled by wind cooling system. It will make electric discharge well and ozone output stable without damaging components.
Use:
Prepare:
1. This product should work in a dry and ventilated room. If it must work outside, please shield it from direct sunshine and rain.
2. For air purification, it can work with a silicon pose linked and the other side led to the place.For water purification,it can work with a silicon linked and the other side put into water with a airstone.
3. Please make sure the silicon pose is in good condition for proper function.
4. Please confirm the arrow on the one-way valve and link the silicon with right direction.
NO | General fault | Fault Analysis | Solution |
1 | Power indicator off | 1No power 2Fuse damaged 3Indicator damaged | 1Link the power 2Change fuse 3change indicator |
2 | Working indicator off | 1No power 2Fuse damaged 3Indicator damaged | 1Link the power 2Change fuse 3change indicator |
3 | No ozone output | 1Discharge bulb not work 2Silicon damaged 3Pump damaged | 1Change discharge bulb or control circuit board 2Change silicon pose 3Change pump |
4 | small amount of ozone | 1Discharge bulb aging 2Ozone bulb hot | 1Change discharge bulb 2Change fan |
Care and Maintenance
1. Please keep the surface of machine clean at regular period.
2. Please change the silicon pose when it is broken..
Note:
1. When for air purification, it is advised that people should avoid the sterilization area in case of respiratory system stimulation because of high density of ozone.
2. For water purification, please instal with anti-reflux device in case of damaging machine.(It is advised to instal antioxidant normally closed valve at the pipeline and it`s power sychronise with ozone power.
3. This product`s voltage is 220V/50HZ and there is a high voltage inside.Please make sure there is a earth wire and avoid electric shock.
4. Do not smell ozone directly in case of respiratory system stimulation.Nor do the pregnant and children.
5. Please cut the power when not use for a long time.