Non-pressure evacuate tube solar coollector - MXR-SC

evacuate tube solar collector

Specifications

Solar Collector, Energy-saving and Environmental Protection, Building Perfect Combination Together

MICHER VACUUM TUBE SOLAR HEATER WATER is specially designed for residential house and building .Such System separates the soalr heat collecting unit and the water tank. The collector can be installed at the sunny facet of a building , such as roof or sidewall. The water tank then can be installed in house with convenience. This makes it possible and easier to install the system aesthetically with original building.

• Advantages:
  1). Highly efficient absorber of high performance with daily average efficiency over 50%;
  2). Start up quickly, heat pipe transfer the heat energy into the storage tank in one direction.
  3). Withstand pressure of 6 Bar, can be connected directly with city water.
  4). No water inside the evacuated tubes; The solar water heater can still in service even with several tubes breakage;
  5). Highly efficient insulation with polyurethane foam;
  6). Simple structure, easy to assembly and install, diffuse flat plate reflector can be assembled easily with its module structure;
  7). Can be used all year round in the cold climate;
  8). Can be used together with Auxiliary electric boost;
  9). Long service life, can be used as long as 15 years.
• Specifications:

  1)Material: aluminum alloy

  2)Solar vacuum tube with heat pipe:

  3)Quantity of tube: 15, 20, 25 and 30 pieces

  4)Hail resistance: 25mm

  5)Insulation layer in chest:

  • 50mm thickness imported polyurethane, machinery overall for keeping same temperature and high pressure foam

  6)Heat preservation: 72 hours

  7)Maximum pressure bearing: 0.6MPa

  8)3 years international responsibility for free repairing or exchange due to original quality problems

  9)Manifold:

  • Material: red copper
  • Casing: aluminum alloy

  10)Glass tube dimensions: 58 x 1.8 and 47mm x 1.5m

  11)Hail resistance: 25mm

  12)Maximum pressure: 10 bars

  13)Working pressure: 6 bars

  14)Coating of vacuum tube: SS-C/CU

  15)Heat pipe: anti-freezing > -35°C

• High quality of tri-elements as rose copper, stainless steel and aluminum nitride planting layers, heat absorption rate can reach more than 93%