High Pressure Solar Panel Collector
1) 3 years lifespan, 15 years lifespan
2) TUV, Keymark
3) Transmission rate: 95.51%
Port: Huangpu,Guangzhou
Minimum Order Quantity: 10 Piece/Pieces or sample
Supply Ability: 5000 Piece/Pieces per Month nomal output
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: carton with foams, wooden packing if in need...
Delivery Detail: 15 working days after payment confirmed for container shipping
Nice High Pressure Solar Panel Collector
STANDARD SPECIFICATION:
Absorber coating: selective magnetic blue sputtering
Optical Performance: Absorption: ~95% / Thermal Emission: ~5%
Frame Casing: Anodized Aluminium alloy; width: 80/82/85/90mm; color: white, black, bronze;
Cover glass: Low iron tempered patterned glass, 3.2mm, high transmittance>91%
Insulation: 25mm soft fiberglass layer + 25mm high- density fiberglass board. Minimum the heat loss
Back sheet: embossed aluminum plate 0.5mm / gavanized steel board 0.3mm
Header tube: full copper TP2 1060mm*22mm/25mm*0.6mm (L*OD*Wall thickness)
Riser tube: full copper TP2 1886mm*10mm*0.45mm (L*OD*Wall thickness)
Fin: copper TP2 0.15mm / Aluminium 0.3mm
Sealing profile: EPDM
Connection: Ø22/25mm
Gross /Aperture area: 2 sqm / 1.85sqm
Gross size: 2000mm*1000mm (L*W)
Operation pressure: 600Kpa ( 6bar)
welding technology bewteen tube and fin: ultrasonic welding; 100% fusion between fin and riser tube
high efficiency, low heat loss
long use life
nice appearance
high-temperature resistance
corrossive-resistance, no scaling
high heat transfer speed
high conductivity
pressure standing
no blasting
Feature:
1)High selective titanium base coating
Introduced from Germany (alanod) into the market, used for solar energy heat collector, the high selective coating is based on coating of blue titanium and quartz, adopts one time ionization coating skills, enjoys unmatchable advantages in features, compared with generally used electroplated nickel and chromium coating, and stands for the new directions of coating technology in solar energy coating technology.
2)High efficiency
The efficiency of solar energy absorber is decidedly by the gathering effect of heat convergence in solar spectrum. The high absorbing efficiency to the solar radiation is the basic condition, and titanium base coating should be the advanced direction for the future development of flat plat solar energy heat collecting technology. The most complicated part should be how to store solar energy into the heat storage system. This coating is not only a high absorbing coating but also store the heat into the inside of absorber while reducing reflective. The result prove that if we use this blue coating technology of titanium and quartz in solar energy heat collector, the system working efficiency can also be greatly improved under the condition of cloudy weather. And the same time, the special tube technology used by Meirun group can reduce the heat loss in tube conduction and increase efficiency.
3)Optical Features
Sunshine absorption: Aapproximate 95% ± 2%
Emissivity(100 º C): ξ Approximate 4% ± 1%
4)Heat Preservation Features
Absorbent: 0.35%-1.5%
Heat conductivity: 0.027 W/(m. K)
5)Intelligent special tempered glass
Solar energy transmission rate: 95.51%
Solar direct reflective rate: 4.03%
Iron in glass ≤80PPM
Incident angle: 90 °
PICTURES for showing the bluetec coating
We also can produced many other solar product, like solar colllector, solar water heater, solar air condition...etc. We have been sold these product to many contries like France, Ukraine, Lithuania...etc.