Nade Mini economic Ultrasonic cleaner 800 - 800

Introduction:

The ultrasonic cleaning makes use of the effect of cavitations and the sonic-pressure, which are generated in the liquid by the powerful ultrasonic. Besides, the ultrasonic can clean the stuff with the liquid detergent.

The process of ultrasonic cleaning likes as below the liquid detergent with the action of ultrasonic wave generates numerous micro vacual bulbs, these bulbs will contract and expand repeatable, resulting from the action of sonic-pressure. Once these bulbs blow out, the exposition forces may strike off the contaminated spots adhered to both on the surface everywhere and in those shrunk corner places. If right amount clean liquid is added in the process, the clean efficiency will be better because of its permeating and dissolving action.

For the action of ultrasonic wave occur in the liquid, what are the stuff will be, once it gets in touch with the liquid, it can be cleaned thoroughly. The clear process is especially fitted for those have complicated shape or many cracks also for smooth or weak stuffs that can¹t be cleaned by hard instrument. Its general uses can be roughly listed as below:

Jeweler, diamond, spectacles, watch parts, knitting matters, seals, false teeth, pens jetting mouth, milk bottle, fruit, and it also can be used to remove nail enamel for ladies, it's fit for medical machine (surgical instruments)and so on.

II. NOMEMCLATURES

1. on/off touching Switch and 3 minutes auto time-setting start up.
2. Indicating lamp of cleaning operations.
3. Water tank of stainless steel.
4. Semitransparent dust cover.
5. Outer box.
6. Power cord.

III. SPECIFICATIONS

1. Voltage Range(v)/Frequency: /220V/50Hz /110V/60Hz
2. Power: 35W
3. Operating frequency: 40KHz

IV. OPERATIONAL METHODS

1. Examine if the power source is energize the machine refer to the specifications of the machine before operations.

2. Put the washings into the plastic container and send to the wash tank run water into for a appropriate scale of the container. You should pay attention to immerge the washings into water.

3. Clean process

a) Put the electric plug into the socket, usually pressing button “ON“ to start clean process. When washing completed, the indicator light will go out and the machine stopped.

b) Press button“OFF” to stop this process. Press button “RESET” to the replacements NOTE: It’s normal you hear the squeak when the cleaning process is going on.

c) When the washing process is finished, remove the electric plug form the out let. Open the translucent cover and take all the washings out. Finally pour the water out of the stainless inner container and clean the machine.

4). Put the right amount clean liquid into the water when the contaminated spots is hard to clean or you want to make the clean process faster. Notice that you must clean the water tank with clean water after process to prevent corruption.

V. SAFFTY CAUTTIONS

Water after process to prevent corruption

1. Take normal voltage of the power source to energize the machine.
2. Never operate the machine without any water in the tank.
3. Never operate the machine over one hour.
4. Put the machine flatly, keep its surroundings clear, wipe and dry out the cleaning solutions spoiled out from the tank of any, and avoid the machine to be collided by hard object.