1. High quality, long time warranty
2. Double-Layers Vacuum Tube with Heat Pipe.
3. No water flows inside the tube,
Port: shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 10000000 Set/Sets per Year
Payment Terms: T/T
Contact SupplierPackaging Detail: carton with foam inside and shrinkable tape outside
Delivery Detail: 10-15days
The split solar water heater is composed :
1.heat collector,
2.storage tank,
3.working station
Working principle:
1) When the temperature of the heat collector reaches the set value, the controller will make shall the circulation pump work automatically.
2) The circulation pump makes heat-conducting liquid circulate automatically.
3) The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.
4) In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.
5) In case the temperature of the tank does not reach Tm ax, then start the auxiliary heating device.
Feature:
1 Collector separates with storage tank. The tank can be put in any place of house. And the collector can be put on the inclined roof or flat place.
2 Module design, arbitrary combination, harmony with the building perfectly;
3 Intelligent control and automatic operation;
4 Anti-freeze: No water inside the tubes when it works.
5 The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.
6 Multifunction: Bathing, washing, domestic heating etc;Work at anytime and enjoyable.
7 Structure:Model No: 100L 150L 200L 300L.400L.500L
Model | NSC-58-10 A | NSC-58-20 A | NSC-58-30 A |
Number of Tubes | 10 | 20 | 30 |
Gross Area | 1.76 m2 | 3.36 m2 | 4.76 m2 |
Absorber Area | 0.82 m2 | 1.64 m2 | 2.47 m2 |
Weight | 35 kg | 65 kg | 100 kg |
Length×Width×Height | 2000×880×180 mm | 2000×1680×180 mm | 2000×2380×180 mm |
Hot Water Production | 85 L/d | 170 L/d | 255 L/d |
Fluid Content | 0.56 L | 1.26 L | 1.77 L |
Max Working Pressure | 6 bar | ||
Max Stagnation Temperature | 230 C | ||
Absorber coating | SS-ALN-CU (σ>0.93 ε<0.07 ) | ||
Long-term Vacuum | 10-6bar | ||
Manifold Shell | 2.0mm frosted Aluminum Alloy | ||
Insulation | Rock Wool, 55mm thickness, 180kg/m3 | ||
Frame | Stainless Steel or Aluminum Alloy | ||
Recommended Installation Angle | 15°~ 90° | ||
Warranty | 10 year |