JinYi electric water heater - JSH

vacuum tube solar water heater, EN12975, SPF, Solar keymark, CE ISO9001, SRCC, High quality & service reasonable price, Prompty - more info check here: http://www.sourcingappliances.com/JinYi-electric-water-heater-11151994/

Quick Brief

Type: Evacuated Tube Pressure: Pressurized Circulation Type: Indirect / Closed Loop (Activ... Heating System: Batch / ICS (Passive) Connection Type: Split Installation: Freestanding Housing Material: Stainless Steel Certification: CE, SRCC, Solar keymark, CE, SPF... Capacity: 200 Place of Origin: Zhejiang China (Mainland) Brand Name: Jinyi & OEM Model Number: JSH Use: Bathroom Controller: LED display, Sensor, automatic oper... OEM: Yes Connect source: Gas boiler, geyser,stove, cyli... Voltage: 110V-240V Easy Installation: save your local labor cost heater: vacuum tube solar water heater

Specifications and Product Details:

vacuum tube solar water heater

1. Jinyi Split solar water heater system technical data:

Model	Tank(L)	Solar collector (Absorb area^m2)	Pump Station	Loading Qty ( 20' / 40'GP )
JSH1-150-15	150	2	1Set (Pump, controller, Expansion vessel.etc.)	35/70
JSH1-200-20	200	3		28/56
JSH1-300-30	300	4		21/42
JSH1-400-48	400	6		15/30
JSH1-500-60	500	7		13/26

The whole solar water heating system Kit consists:
All solar collectors are approved to EN12975 & Solar KeyMark
1) 1 × High performance 20 Tube Jinyi Ø58mm - 1800mm collector, featuring a contoured aluminium alloy manifold.
2) 2 × Easy fit solar roof bolt pack (total 4 bolts)
3) 80L-500LL Stainless Steel Un-Vented single or double coil solar tank/ solar cylinder with 60mm insulation (Plastisol Finish)
4) 1 × Installation control and safety pack for unvented cylinder ( See Unvented Cylinders for details
5) 1 × Jinyi Pump Station, containing: High lift Wilo pump, Delta Sol Electronic solar controller full kit (with sensors), Flow setter, Filling connection, Isolating valve, Non return valve, Safety pressure valve (6 bar), Flushing connection, Pressure gauge, Wall fixings & Insulated body.
6) 1 × 15Mtr Silicone sensor extention wire (for collector sensor)
7) 1 × Automatic Air Vent, for air purging.
8) 1 × 5-24 Ltr High Pressure / Temperature Expansion Vessel
9) 1 × Expansion Vessel Mounting Kit (with flexible mounting hose)
10) 2 × 6 Ltr Premix Anti freeze / Heat Transfer Fluid
11) 1 × Sensor Connection Box for Lightening Protection
12) 1 × Tube Heat Conductive Paste
13) 1 × Transit Tube ( A spare tube is shipped with each collector order safe guarding against any damage in transit)

2. Working Principles:

1) When the temperature difference between the solar collector and tank is exceededthe set value temperature difference, the controller shall start the circulationpump automatically, transfer heat from collector to tank;

2) When the temperature difference between the solar collector and tank drops belowthe set value temperature difference, then circulation pump stop;

3) The circulation pump makes heat-conducting liquid circulate automatically;

4) The heat-conducting liquid transfers heat to water by heat exchanger in the watertank;

5) In case the temperature of the water tank does not reach the max., then startthe auxiliary heating device

3. Feature:

1) Collector separates with the storage tank. The tank can be put anywhere of the house;
2) And the collector can be put on both tilted roof and flat roof;
3) Module design, arbitrary combination, harmony with the building perfectly;
4) Intelligent control and automatic operation;
5) Anti-freeze: no water inside the tubes when it works, can work at -50 degree area.
6) The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature
7) Multifunction: Bathing, washing, domestic heating
8) Workable at anytime and enjoyable

9.Jinyi split pressurized solar water heater consist of: heat pipe solar collector, solar water pressure tank, pumpstation.etc.