Infrared carbon fiber heating tube - OYT

Product Description
∑ Elements of infrared heaters:

For practical purposes, most infrared heaters are constructed by either using the emission of a flame (usually soot or a heated matrix) or an electrically heated filament as the emitting body. If an electrically operated infrared heater (infrared lamp) is used, the filament is usually protected by a heat-resistant quartz glass tube. Depending on the filament temperature, a filling of the quartz tube with inert gas (e. G., halogen) may be required to prevent filament degradation. These emitters use the same materials and principle as a light bulb.
Industrial infrared heaters sometimes use a gold coating on the quartz tube that reflects the infrared radiation and directs it towards the product to be heated. Consequently the infrared radiation impinging on the product is virtually doubled. Gold is used because of its oxidation resistance and very high IR reflectivity of approximately 95 %

∑ Applications of infrared heaters:

IR heaters are used in industrial manufacturing processes including curing of coatings, shrink tunnels, heating of plastic prior to forming, plastic welding; Processing glass; , and cooking and browning food. They are used when high temperatures are required, fast responses or temperature gradients are needed or products need to be heated in certain areas in a targeted way. Their application is difficult for objects with undercuts.

Another recent use is in house heating, various companies sell infrared heaters for house use, claiming some medical benefits due to better circulation[citation needed] also infrared saunas claim same benefits.

∑ DESCRIPTION OF TWIN TUBE INFRARED HEATING LAMP:
Finish: Gold reflector covered half of quartz twin tube
Voltage: 400V
Power: 5000W
Diameter: 33X15mm
Length: 680mm
Ceramic cap: F4 type
Connection: One side

To order you must inform us the following features:
- Diameter of the heating emitter
- Length of the heating emitter
- Wattage
- Voltage
- Connection
- Termination type how you want the heater to be connected with the electricity (screws, cable, cap etc. )
- Special Features (holes etc. )

It would be much better for us to understand If you could send us a drawing with all the characteristics noted.