Industrial water ionizer - EHM-2000

Electrial Specs:380V /1800W Overall dimensions : Unit weight :232KGS Flow rate through the unit:≥68 L/Min The output for the alkaline water :34 liters /min The output for the acid water :34 liters /min PH Level:3.5 to 10 ORP Level : 450 to - 550 Electrode material: Titanium with platinum coating Electrode cleaning :Auto cleaning # of electrode tank :2 PC Electrode duriation : ≥1500 hours Protection(Auto shut off)on:Low/High water pressure,overheat Required water source :Municipal or well source Environment humidity Limits: less than85% Environment temprature Limits : 5-40°C Water TDS range :150-800 Warranty : 3 years free warranty

1) Open the feed, all the manual valve water mouth, ensuring access to water flow.

2) Check the steering pump impeller is correct? Otherwise, adjust the phase of the pump power.

3) precision filter first with water, it should open the top of the ball valve, side exhaust through water's edge, close the valve after gas emission.

4) switched on, adjust the valve before and after the pump, the water limits the total flow generated in the device capacity of the electrolysis of water 2 times. For example, FX-1000 type, alkaline water electrolysis generated per hour, 1,000 liters, 2,000 liters water should be about the total flow. Then, adjust the flow control valve main cabinet M16 and M17, M14 and M15 effluent flow meter is equal to the flow shown.

5) Check the equipment and instructions of the function is normal?

run 15-20 minutes, rinse pipe and other wading components

1) Open the feed, all the manual valve water mouth, ensuring access to water flow.

2) Check the steering pump impeller is correct? Otherwise, adjust the phase of the pump power.

3) precision filter first with water, it should open the top of the ball valve, side exhaust through water's edge, close the valve after gas emission.

4) switched on, adjust the valve before and after the pump, the water limits the total flow generated in the device capacity of the electrolysis of water 2 times. For example, FX-1000 type, alkaline water electrolysis generated per hour, 1,000 liters, 2,000 liters water should be about the total flow. Then, adjust the flow control valve main cabinet M16 and M17, M14 and M15 effluent flow meter is equal to the flow shown.

5) Check the equipment and instructions of the function is normal?

run 15-20 minutes, rinse pipe and other wading components