Hybrid cassette solar air conditioners

Solar air conditioners are offered in two different designs: cabinet and wall-mounted. In general, we use wall-mounted conditioner in the room since they occupy less space. At the lobby, we usually use cabinet air conditioning instead of the radiators to save space and reduce the cost of packaging the radiator. Solar air conditioner heats the room in winter and cools the air in summer time. With such a Solar-dual heating and cooling system, the cost and space requirements of having both radiators and air conditioning are reduced to only one system providing all your heating and cooling needs.

Technical advantage:

1. Inexhaustible energy: not only during winter heating but for the whole year.

2. Super-conducting solar heat collector: based on the theory of super-conducting to collect the scattered solar radiant energy and delivery it to the indoor cooling & heating system. After small modification, the system also can be used for drying agricultural product’s, wood, chemical raw material and to warm the greenhouse independently.

3. Super-conducting ground-source cooling system: by using the energy generated by the ground’s low temperature, the room can be directly cooled down via the super-conducting system in summer.

Features

1. Fast warming up: because of the aluminum bronze air conditioning evaporator, the coefficient of heat transfer is several times higher compared to conventional heating systems. With the forcing convective exchange by the air blower, the speed of warming up is almost 10 times faster than conventional heating. The temperature can rise up to 20°C with a few minutes.
2. High heating efficiency: with hot water just over 30°C can be used to keep the room temperature above 20°C. Conventional heating needs hot water above 80°C to keep the room temperature above 20°C. Thus the heating efficiency is much higher and saves in addition over 50% of the energy needed to heat the room.
3. Low power consumption: a 1.5P wall-mounted solar air conditioner can supply heating for a room with 20 – 30 m², the power consumption is only 10W, which is equal to an energy-saving lamp. The consumption of 3 days’ continuous heating is only 1000W.
4. Low cost: Only turn on the air conditioner at the room needed. By turning off heating in rooms not need, up to 50% of the heating cost can be saved.
5. Energy saving & environment protection: no compressor, no Freon is used, and thus no dangerous chemicals are released which would destroy the atmospheric ozone layer, but still provides appropriate energy for heating in winter and cooling down in summer.