Environmental
3 years guarantee
OEM service offered
High quality @ reasonable price
High pressure separate solar water heate
Port: Shanghai/Ningbo
Minimum Order Quantity: 2 Set/Sets
Supply Ability: 5000 Set/Sets per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: samples: wooden casescontainers: normal packages
Delivery Detail: 15-20days after advance deposit
High pressure separate solar water heater
1. Image of separate solar water heater
2. Introductions of split high pressure solar water heater
pressurizd solar water heater is a split system, where the collector is separated from the storage tank. It is flexible assembly, combined with building perfectly. The system consists of storage tank, solar collector and working stations.
Two heat exchanger models can be used for houses which have been already equipped with other energy sources (e.g. gas, boiler etc). When the weather is cloudy or raining for a period of time, the water can be heated by upper heat exchanger sourced by other energy. All the storage tanks should be tested as tested pressure of 1.2 MPa (12bar) and the working pressure is 0.6MPa (6 bar). The daily efficiency is over or equal to 55%.
3. Working principle
Solar collector gathers energy and heat the medium material in the copper pipe, the medium transfers the heat to the water in pipeline the solar collector. When there is temperature difference ( settled by customers) between the two sensors in collector and tank respectively, intelligence controller activates the circulation pump automatically, and forces the flow of heat medium in the pipeline and do heat exchange with the water inside the tank via copper coil in the storage tank. In case the temperature of the water tank does not reach T-max, then start the auxiliary heating device.
4. Features of high pressure solar water heater
*Use heat pipe for the heat conduction and can get a high heat absorption efficiency and rapid
heat transfer.
*The pipeline is made of red copper and conducted by heat transfer medium
liquid; the crust uses aluminium alloy mould material of high strength with airflow design
*Good anti-frozen performance, it can still work under the environment of-30
*Match with intelligence controller and assistant electrical heater, the system can provide hot
water to you anytime.
*The insulating layer uses polyurethane bulk bubble and has a good effect of temperature
preservation