High Quality Pressurized Solar Water Heater System - MXR-SSMP

Pressure Solar Water Heater System

the solar collectors, storage tank, solar workstation, thermoelectric pipeline four parts consist this system

Feature:

1. No disorder water tank on your roof
MICHER Flat Split Solar Hot Water is using a high efficiency solar collector on your roof and a high pressurized storage tank in the house. Integrated in to the roof of the building perfectly.

2. Pressure hot water, comfort bathing
It applies pressure bearing design, & in case of switch-on, it shall have pressure hot water immediately with strong water outgoing, large water quantity & flow.

3. Collector part module for freely assembly
Modules collector component constituted by high temperature special effect pipe, & can be freely assembled as per requirements.

4. Intelligent control with complete function Control system of integration & intelligentization: convenient & quick;

5. Diversification of installation position, perfect combination with building
Heat collector shall be suitable for multi building style with diversification of installation position.

6. Separate type installation; simple & convenient.
Heat collector shall be separated with water storage tank, & water tank position shall have no limit. Standard modularization for fast assembly: easy & quick.

7. Use with cooperation of auxiliary energy resource
Auxiliary energy resource interface shall be reserved so as to achieve full day hot water supply with combination of electric energy, fuel oil & gas boiler.

Specification of pressure solar water heater system :

1.Inner tank material:SUS 304 stainless steel 0.4 mm thickness

2.Outer tank material:Color steel or stainless steel

3.Vacuum tube:58*1800mm

4.Tube quantity:15/18/20/24/30

5.Heat presevation:55mm-60mmpolyurethane wholly machinery compression form foam

Working pricilple of pressure solar wate rheater system

1.When the temperature of the heat collector reaches the set value,the controller shall start circulation pump automatically.

2.The circulation pump makes heat-conducting liquid circulate automatically

3.The heat-conducting liaui transfers heat to water by the heat exchanger in the water tank.

4.In case the temperture of the circulation pump does not reach the set value,the circulation pump ahall be shut automatically.

5.In case the temperature of the water tank does not reach Tmax,then start the auxiliary heating device.