Heat pipe integral pressurized solar water heater JY-2X - JY-2X

Integrated heat pipe pressurized solar hot water system includes the storage tank, vacuum tubes with heat pipe and so on.

Specifications:

Inner tank: Pressurized food grade SUS304/2B stainless steel with 1.50mm thickness

Outer tank: SUS304-2B stainless steel with optional 0.40mm thickness

Copper coil: TU1 red copper, diameter 12mm, thickness 0.80mm

Water capacity: 200L, 300L

Pressure: 0.6 MPA

Heat preservation: 80-90hours

Hail resistance: 28mm

Tube standards: 20, 30 borosilicate glass 3.3 tubes with 58mm diameter and 1800mm length.

Absorptive rate: more than 96% (AM1.5)

Stagnation temperature: 300 centigrade degree

Freezing resistance: -50 centigrade degree

Heat insulating layer: Improved polyurethane integral foaming with thickness 60mm

Bracket: Stainless steel SUS304/2B with optional 0.55mm thick

Fasteners: stainless steel screws

Seal: Imported silicone rubber polymer ring to connect and seal

Features:

1, No water in the tube so it never cracks and fur up.

2, Stand up to freezing under -50 degrees.

3. Needs only temperature difference, sunshine is unnecessary, high heat conduction and will never hibernate.

4, Ultra low temperature molecule vaporizing conduction (vaporizing point of the medium in the pipe is -38 degrees).

5, Low heat capacity and fast warming-up, heat output power is above 120W , fast conduction can be measured by second and is 1000 times of copper, conduct heat effectively even under non-sunshine weather.

6, Even one of the pipes is cracked, the machine works as well as usual because each pipe works independently.

7, Tri-layer vacuum protect heat from losing, good one-way conduction have effective heat preservation.

8, Heat pipe is free from water flow, which ensures cleaner water.

9, Heat pipe keep earth sediment away, realizes everlasting high heat efficiency.

10, Produce more hot water than the general types.

11, All the advantages listed above ensure low maintenance cost during the product life.