Heat Pipe Solar Energy Water Heater - JNT

Solar Energy Water Heater

The JINYI Solar JPH series of vacuum tube integrated pressurized solar water heaters offer excellent value as they have a very low cost per kWh of output.

The collectors are also very easy to transport and handle as the tubes can be disconnected from the tank of the system.

The JHC collectors are heat pipe type collectors in which the tubes transfer the collected energy to the tank, where it heats the water for application.

They are ideal for different latitudes due to their high efficiency, especially advanced in high latitude area, even in cold winter.

Specification:

Vacuum tube: with heat pipe, 58 x 1800mm, 15tubes

Absorber coating: ALN/ALN-SS/CU

Absorptance: a=0.93-0.96 (AM1.5)

Tank capacity: 125litre

Insulation layer: 52.5mm

Solar collector absorber area: 1.92m²

Stagnation temperature: 221°C

Testing pressure: 1.2Mpa

Working pressure: 0.6Mpa;

Inlet & outlet: 3/4"

T/P valve: 3/4"

Magnesium rod: 1/2"

Temperature sensor: 1/2"

Frame: aluminium alloy or galvanized steel, 2.0mm

Collector angle: 27, 38, 45 degree, optional

Characteristic

1) This type of solar hot water heater works with high pressure, so do the water it produces.

2) It uses the heat pipe vacuum tube to delivery the heat energy, it can works rapidly.

3) Because of no water in the vacuum tube, so there will not tube breakage in the winter..

4) Each vacuum tubes can work alone, so it can still operate in the event of occasional tube breakage.

5) Can be used all year round in the cold climate

Heat Pipe Solar Energy Water Heater

Using a thermosiphon solar water heater systems is an excellent way to start saving on your domestic hot water heating bills. The tank must be above the collector, so the thermosiphon phenomenon can occur, circulation water from collector to tank.