Hand held air conditioning fan (unique and effective water evaporative cooling technology, air conditioning fan) - air conditioning fan

Hand held air conditioning fan

Now this hand-held mini air conditioning, use a unique and effective water evaporative cooling technology, just add water to activate the cooling function, using only four AA batteries, you can easily enjoy this little guy blowing humid cold wind, and this ordinary AA batteries, can use more than 5 hours. So do not worry about strike in the middle.
Most suitable for its use, it is outdoor activities, whether intermittent break during sports, or crowded concert scene, your palm, there will not stop the cool source!
The product itself is equipped with a 60ml bottle, a USB cable connected to the computer, and a water-cooled sponge
It us also very easy to use: with the bottle of water dripping homogeneous on the sponge. Just give it power, it is able to work!
It is advanced wood pulp sponge. Can be used repeatedly for a year. Of course, you need to pay attention to clean it after use it, it is best to dry it out!

Product parameters:
1, There are two working mode of air conditioning
Cooling fan mode and ordinary fan mode
There are: after moistening the equipped sponge (the standard is not dripping), put sponge back into the machine-specific area. Start it, cold air can be achieved.
If no need to cooling, put the sponge out and continue start device, there will be no cold wind blowing.
The absorbent wood pulp sponge can be reused!

2, Power Supply
There are three air-conditioning power supply
1) 4pcs AA batteries (need to self-made)
2) USB interface power supply (with a USB cable)
3) the power supply directly (AC adapter to be user-supplied)
The new ABS material, and case is not easy to scratch.

3 Notes
A: Product is not waterproof, the sponge should be removed to add water. Not direct add water, to prevent water into inside the machine to make damage.
B: Standard of sponge humidity is not dripping. If too much water can be wrung out and then install into the internal machine
C: Product is not anti-high-altitude drop, take note.
D: Recommend: after you using sponge, please dry sponge, to avoid the breeding of bacteria and smell.
Tip: If you need it to blow out cold with flavor, you can put a few drops of essential oil to the sponge. Of course, we must remember to put into water to clean and then dry cleaning!

Battery Installation:
Battery slot is located on the handle, near tape.
1) Slide the battery slot cover and remove
2) Install 4 pcs AA alkaline batteries
3) Close the battery slot cover
4) Remove the batteries if long-term not using.
Support external power supply, the DC external power supply socket located near the tape interface.
1) Put DC plug into the socket.
2) connected to the household power supply, you can use the player without the battery.

Installation of water-cooled sponge
1) Turn off the machine
2) pull out top lever, take cover and sponge off.
3) For the first time: the water-cooled sponge soaked in water and rub thoroughly with soap. Please be careful with sponges, do not wash with much force.
4) If there is water left last time used, please remove the sponge from the lid, squeezed out remainder water .
5) Put the sponge into mathine flatly, operation with the following description: The bottle filled with tap water, distilled or mineral water, and even slow down 30ML of water throughout the sponge surface.
6) Install the wet sponge, then lock lid as push lid down to the host.
Note: Do not over-water sponge. Do not soak the sponge below tap water.It is diffecult to control 30 ML water, please use the bottle.
Note: The machine is not waterproof, please note avoide water into device.
Note: If the water leak occurs in the operation, then it may be in excess of water into sponge; or perhaps you did not squezze the remaining water out before soak the sponge .

Operating
Above the host battery cover has two switches:
1) The snow switch can control the machine power and the speed of air cooler
2) Start the machine, press the snow switch, with low speed. Press again, with high speed to run (speed can be adjusted by environment)
3) rotating air tube can adjust air output direction, easy to provide you a better cooling effect.
4) When the cold air is reduce, please re-soaked sponge. Open the lid, touch the sponge and confirm sponge is dry. The using time is vary cause of different operation and environment(roughly half an hour to 3 hours)
5) Ensure that the sponge is wet regularly, if the sponge is dry, re-soaked sponge
Note: To effectively produce cool air, the sponge must be wet, if not, follow the water-cooled sponge installations.
Maintenance sponge
After operation, follow the instructions to remove the sponge cover, squezze water out of sponge, then let sponge to air dry.
For get best effect, regular cleaning of your water sponge, soaking anti-bacterial before using.
Note: Make sure your hands clean when dealing with sponge
Aroma
In order to have a slight fragrance, you can use essential oils on sponge . After the sponge soaking wet, a few essential oils drops on the surface of the sponge, wash thoroughly after use.
Do not mix with different smell on same sponge.