Galvanized steel solar water heater - JXSY-0856

Galvanized steel solar water heater

Advantages:
1. Can be operated completely automatic if connect with intelligent controller.
2. Simple structure, easy plug-in installation, can be installed both on flat
and inclined roof, and can be used with an auxiliary electric booster as to
provide tot water without sunshine.
3. Superior heat preservation ensured by one-off molding polyurethane foam with
thickness 50 65mm.
4. Suitable for camping area, holiday residences.
5. stable and reliable performance, well wind resistance.
6. Meet the mankind healthy bath standard: The material of inner tank is
SUS304-2B stainless steel plate; the silica gel ring sealing has a long life
against the erosion and it ie not harmful to health.
The details of material:
Evacuated tube: High quality borosilicate glass 3.3, Φ47×1500, Φ58×1800/2100,
Φ70×2100
Inner tank:SUS304-2B stainless steel plate
Outer tank: Enamel steel plate
Insulating layer: Polyurethane foam
Bracket: Aluminum alloy
The Principle of thermosyphon
Because of the larger proportion of hot water than cold water, cold water flows
downward and hot water goes upward. The water will be heated continuously
between water tank and vacuum tube. In other wards, hot water always floats on
cold water.
The hot-water flows to the water tank from the vacuum tubes. Because of the
proportion, cold water flows to vacuum tubes from the water tank.
The cold water is heated in vacuum tubes. After it becomes hot water, it flows
to water tank again. The water circulates constantly between water tank and
vacuum tubes; the cold water in water tank will be hotter and hotter.
Finally, all cold water will be heated to be hot water. This is the heating
course of cold water.