Solar thermal collector
High absorptivity coating
Low iron tempered glass
20 years life span
SRCC & Solar keymark
Port: Shenzhen
Minimum Order Quantity: 50 Piece/Pieces
Supply Ability: 3000 Piece/Pieces per Month
Payment Terms: T/T,Western Union
Contact SupplierPackaging Detail: Export package
Delivery Detail: 10-20 days
1.A flat panel solar collector consists of an absorber, a transparent cover, a frame, and insulation. Usually an iron-poor solar safety glass is used as a transparent cover, as it transmits a great amount of the short-wave light spectrum Simultaneously, only very little of the heat emitted by the absorber escapes the cover (greenhouse effect).
2.In addition, the transparent cover of flat panel solar collector prevents wind and breezes from carrying the collected heat away (convection). Together with the frame, the cover protects the absorber from adverse weather conditions. Typical frame materials of flat panel solar collector include aluminum and galvanized steel; sometimes fiberglass-reinforced plastic is used.
3.The insulation on the back of the absorber and on the side walls lessens the heat loss through conduction. Insulation is usually of polyurethane foam or mineral wool, though sometimes mineral fiber insulating materials like glass wool, rock wool, glass fiber or fiberglass are used.
4.Flat panel solar collectors demonstrate a good price-performance ratio, as well as a broad range of mounting possibilities (on the roof, in the roof itself, or unattached).
2.The parameter of SRCC Commonpraise flat-plate collector:
Type: | P3-1-B-L |
Dimension: | 2000*1000*100mm |
Weight: | ~49kg |
Efficiency area: | 2m² |
Thermal efficiency: | 76% -78% |
Max working pressure: | 0.8Mpa |
Resistance freezing: | higher than -40°C |
Cover quantity: | 1pcs |
Cover material: | Low-iron Tempered glass |
Cover transmission: | higher than 94% |
Absorber material: | Red copper Black chromed coating |
Absorption: | >95% |
Emissivity: | <15% |
Header material: | Copper Tp2 |
Header size: | Ø25 2pcs |
Riser material: | Copper Tp2 |
Riser size: | Ø10 8pcs |
Fill capacity: | 2.0L Including Header pipe |
Thermal insulation: | Polythurethane 50mm |
Frame material: | Aluminum alloy |
Color: | Siver/black/brown |