Flat Plates Solar water heater
do OEM,
ISO,CCC,CE approval
It's especially fit for those warm areas
Port: shanghai
Payment Terms: L/C,T/T
Contact Supplier
Flat Plates Solar water heater
Special Anodized aluminum alloy frame to ensure handsome appearance and can accept high pressure without leakage
50mm fiberglass insulation and EPDM seal strip to assure the solar collectorcan work under harsh and very cold temperature
Operation Temperature -33120
Patterned temper glass or low iron temper glass (4mm thickness) is not easy broken with very high transmission and low emission. Black chrome or Magnetic blue sputtering coating has very higher absorption rate to ensure the high efficiency.
Model | Gross area (m²) | Absorb (m²) | Material | Header tuber size | Riser tuber size | |
SHFPC2.0 | 2.0 | 1.73 | Copper and Aluminum | 22X0.6 | 12X0.4 |
FP Collectors (Model:SHFPC-FP)
Absorber Type | Flat plate tube |
Absorber fin material | Aluminum |
Sputtered surface | Black color, anodic oxidation layer |
Absorptivity | α=0.93(±0.05) |
Emittance | ε=0.12(±0.02) |
Tube Array Riser to heat layer joint | Supersonic melting solder |
Header material Header size | copper Φ 25mm |
Riser material Riser size Number of risers | Copper and Aluminum Φ 12 mm 7 set |
Collector socket material Collector socket thread size Maximum torque Connetion pip size | Free machining brass 20mm(3/4 BSP) 0.03 kN-m 19.1mm OD ( 3/4) |
Weights & Measures Weight empty Weight full Structural pressure test | 31.5kg 40kg 300kPa |
If any interest,welcome to contact me:008613401342073.