Energy-efficient and Green
Split Pressurized solar water heaters without Heat Exchanger
ISO9001 CCC SRCC solar key mark
Port: Shanghai
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 3000 Set/Sets per Year
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: carton for FCL ,wood box for LCL and examples
Delivery Detail: within 10 days
Energy-efficient and Green
enamel inner tank
heat pipe collector or flat collector
Split Pressurized solar water heaters without Heat Exchanger
ISO9001 CCC SRCC solar key mark
Product description:
SKI-SA contains three main parts: Solar Collector, Working Station and Water Tank. The solar collector installed on roof or wall. The tank can be put anywhere of the house, so the whole system is harmonious with the building. The heat was transferred from solar collector to the tank by controller. High efficiency and cost save. And if the sunshine is not enough, the user can apply to electric heating element for back up. Even if in cloudy or rainy day, the user can enjoy hot water. It is ensured that when using heat pipes no water goes into the tube and there are no incrustation, no bursting. Moreover, water can go upward at anytime.
Working Principle:
When the temperature difference between solar collector and tank reaches the set value, the controller will start the circulation pump automatically. The circulation pump makes hot water circulate. The hot water into the tank and the cold water goes to the solar collector. When the temperature difference between solar collector and tank doesn’t reach the set value, the circulation pump will be shut automatically. In case the temperature of the water tank does not reach Tmax, Electric Heating Element will start to work automatically. As shown in Fig-1.
| Inner tank | Titanium Steel, thickness: 2mm and Enamel Coating, thickness: 0.5mm. |
| Outer tank: | Colored Steel Sheet thickness: 0.5 mm |
| Tank Include: | 1.5kw or 2.5kw Electric Heating Element, T&P Valve, Mg Anode, sensor. |
| Tank Capacity: | 80 L to 500 L |
| Working Pressure | 0.6 Mpa |
| Vacuum tube | Heat Pipe. |
| Vacuum tube model | 58mm× 1800mm |
| Frame | Adopt galvanized steel. Thickness: 1.5mm. |
| Accessories: | Circulating Pump, Solar Controller. |
Model No.: SN-SP05
Features: Efficiency presssurized solar water heater
1.CE,ISO9001,CCC, certificates
2.15years warranty for collector
3.OEM or LOGO
Model No.: SS-M
Features: solar geyser
1. EN12975 & solar key mark
2. Anti-freezen & pressurized
3. 15 Years Warranty
Model No.:
Features: Compact solar water heater
1) Prompt delivery
2) Energy saving
3) Small order and OEM order are accepted
Model No.:
Features: Water Heater
1.Faster delivery,Longer life time
2.Absorb rate:>93%
3.OEM order workable
Model No.:
Features: vacuum tube solar water heater
1:High efficiency energy saving
2:Easy install
3:CE ISO9001:2000
4:5 years warrantly
Model No.: YJL-AT-A1
Features: high efficient solar water heater
1.5 years guarantee,15 years lifetime
2.Easy and convenient installation
3.Highly absorber
Model No.:
Features: Solar water heating system
1.tank capacity 100-300 Liter
2.ISO9001 and SGS certificate
3.Economic
Model No.: BLC125818-100L
Features: 1.CE,SRCC,Solar Keymark,SABS
2. Anti-freezen & pressurized
3. 10 years warrantee
4. 10-15 days delivery
5. OEM available...
Model No.: LQ-NSWH-1101-1
Features: 1 hot water provision all year round
2 aesthetical design
3 freeze resistance
4 reliability and durability
Model No.: SFH47205818
Features: pressurized solar water heaters
1. Capacity:70-320L
2. Accessory:Immersion Heater
3. ISO, CE, SABS
Model No.: HM-TYN002
Features: It uses the heat pipe to delivery the heat energy, water is heated rapidly.Each tube can work alone
Model No.: H-250S
Features: solar water heater
1,ISO9001,keymark,ce
2,high absorption
3,5 years replacement
4,oem is ok