ESS-300-40 Pressurized Solar Water Heaters - ESS-300-40

Pressurized Solar Water Heater

Working Principle

The collector absorbs solar energy and transmits it to the water tank through circulation. When the temperature of the collector reaches the set value, the controller turns on the circulation pump automatically.

The Characteristics

• Pre-assembled, pre-plumbed and wired.
• Simplicity of design with the highest achievable operating efficiencies.
• Instant hot water with comfortable pressure.
• Intelligent control system with complete function.
• Electric heater will flash on automatically if the water temperature is below the desired level.
• Flexibility of installing solar collectors on the roof or walls.
• No water in vacuum tube to freeze in winter.
• Very little maintenance and very low operating cost.

The Specifications

• The complete system includes
• a) main system (pressurized water tank, heat exchanger, expansion vessel, pump, solar energy station, solar controller)
• b) solar collectors (heat pipe)

• Inner tank: δ=1.2mm SUS304/2B

• Outer tank: electrostatic spray V<0.01-0.1

• Bearing force: 0.6MPa (6 hot water pressure)
• Volume of expansion vessel: 5L
• Pump: 220V(50Hz) / 90W / Shielding
• Heat exchanger: copper coil
• Mandatory circulation setting range: 0-30'C
• Collector supporting frame: electrostatic spray V<0.01-0.1
• Daily maximum hot water output: 45'C/180kg
• Daily maximum hot water temperature: 95'C
• Daily efficiency: ≥55% (≥42% during winter)
• Heat preservation: 72 - 80hr
• Auxiliary electric heater: 220V(50Hz) / 1.5KW
• Third heating interface: Provided
• Safety protection: ground, leak-proof