DIGITAL ELECTRIC KETTLE - BR-98B03

1)HIGH QUALITY STAINLESS STEEL HOUSING,

2)DIGITAL DISPLAYER FOR TEMPERATURE.

3)BOIL &KEEP-WARM WITH TWO FUNCTIONS.

4)360 DEGREE ROTARY SYSTEM.

5)CORD STORAGE.

6)LATEST DESIGN AND FUNCTION.

7)OPERATION:

1) SET BASED ON A FIRM AND STABLE SURFACE.
2) OPEN THE TOP OF THE KETTLE AND FULL IT WITH THE WISHED QUANTITY OF POTABLE WATER. YOU CAN CHECK THE WATER LEVEL WITH THE INDICATOR LOCATED THROUGH THE INSIDE OF THE KETTLE.
DO NOT TOUCH ANY PART OF THE KETTLE DURING OPERATION EXCEPT THE HANDLE.
3) BE SURE TO PROPERLY CLOSE THE TOP AND TO MEET THE MINIMUM AND MAXIMUM LEVELS OF WATER INDICATED. DO NOT OVERFILL.
4) PUT THE KETTLE ON THE BASE WITH A FIRM AND SECURE WAY.
5) CONNECT THE POWER CABLE TO THE POWER SUPPLY.
6) SELECT THE DESIRED TEMPERATURE FOLLOWING THE DETAILS AS FOLLOWS:
A) TO BOIL WATER, PRESS THE RED BUTTON "BOIL / KEEP WARM" FOR 3-5 SECONDS UNTIL THE DISPLAY SHOW THE SIMBOL . THE KETTLE WILL START WORKING. WHEN THE WATER REACHES 100° C AND BOILS, THE KETTLE WILL TURN OFF AUTOMATICALLY AND WILL MAKE A SOUND.
B) TO WARM WATER BETWEEN 30° C TO 80º C, PRESS THE RED BUTTON "BOIL/KEEP WARM" FOR 3-5 SECONDS UNTIL THE DISPLAY SHOWS THE SYMBOL AND SET THE DESIRED TEMPERATURE PRESSING "+"TO INCREASE TEMPERATURE OR" - " TO LOWER THE TEMPERATURE. IF YOU WANT TO WARM WATER TO A TEMPERATURE FOR IDEAL MATE, SET THE TEMPERATURE AT 80° C. THE KETTLE WILL START. WHEN THE WATER REACHES DE SET TEMPERATURE, THE KETTLE WILL NO LONGER HEAT AND STAYS IN A STANDBY MODE. WHEN THE WATER TEMPERATURE FALLS BELOW THE DESIRED TEMPERATURE, THE KETTLE WILL START HEATING AUTOMATICALLY AND CONTINUE UNTIL THE TEMPERATURE IS NEAR TO THE SELECTED. THROUGH A REPEATED PROCESS THE KETTLE WILL KEEP THE WATER AT THE DESIRED TEMPERATURE.
MAKE SURE THE WATER LEVEL IS BETWEEN THE MIN AND MAX.
TO INTERRUPT THE PROCESS OF HEAT PRESS THE RED BUTTON "BOIL/KEEP WARM" FOR 3-5 SECONDS.
THE KETTLE WILL BE STOPPED WHEN THE DISPLAY SHOWS NO SIGNS LIKE AND ON THE LEFT, JUST SHOWS THE SELECTED TEMPERATURE.

TO PASS FROM ONE FUNCTION TO THE OTHER YOU MUST PRESS THE RED BUTTON “BOIL/KEEP WARM” FOR 2-5 SECONDS.
BY PRESSING THE BUTTON FOR THE FIRST TIME, THE CYCLE STARTS WITH FUNCTION "BOIL" AND CONTINUE AS DETAILED BELOW:

7) AFTER PERFORMING THE PROCESS, UNPLUG THE KETTLE OF THE POWER SUPPLY. WHEN SERVE THE BOILED WATER DIRECTLY FROM THE KETTLE KEEP THE TOP CLOSED. YOU CAN SERIOUSLY SUFFER BURNS!