Compact pressurized heat pipes solar water heater (SLCPS)manufacture since 1998, EN12975,SOLAR KEYMARK,CE,BV,SGS,CCC Approved - SLCPS

Compact pressurized heat pipes solar water heater (SLCPS)manufacture since 1998, EN12975,SOLAR KEYMARK,CE,BV,SGS,CCC Approved

Components:

Heat pipe evacuated tubes, solar storage tank and support

Features:

The Skylight solar storage tank must be integrated with the solar evacuated tubes;

The Skylight system has to be installed on the ground or on the top of the roof;

The Skylight water coming down for shower is because of the pressure of the city water;

Advantages

1. Uni-directional heat transmission

2. Can start from lower temperature

3. Faster transmission

4. Lower heat capacity

5. Low temperature resistance

6. Freeze-proofing

7. High frequency soldering inner tank

8. Rating pressure is 0.6Mpa, 0.4Mpa separately, can connect directly with the city water system

9. No water in the vacuum tubes eradicates the incrustation scale, thus keeping them running in high efficiency,

Technical data:

Skylight Evacuated Tube Specifications:

1. Length (nominal):1800mm

2. Outer tube diameter: 58mm

3. Inner tube diameter: 47mm

4. Glass thickness:1.8mm/2.0mm

5. Thermal expansion: 3.3x10-6^°C

6. Material: Borosilicate Glass 3.3

7. Absorptive Coating: Graded Al-N/Al

8. Absorptance: >93% (AM1.5)

9. Emittance: <8% (80^°C)

10. Vacuum: P<5x10-3 Pa

11. Stagnation Temperature :>200^°C

12. Heat Loss :< 0.8W/ ( m2^°C )

13. Maximum Strength: 0.8MPa

14. Start-up temperature:≤25°C

15. Anti hail:≤Ø 25mm

16. Weight: 2.2kg

17. Skylight Package: 1880*330*170(10pcs)1880*280*170(8pcs)

18. Special tube like 100mm or 120mm tubes are also available against request

Heat pipe specification

Material: TU1

Wall thickness 0.6mm

Temperature can bear(Centigrade) 220

Start up time: 30S

Start up temperature: 25 Centigrade

Diameter and length of condenser 16mm/55cm

Diameter of the tube body 8mm

Vacuum degree: 4*10-3Pa-4*10-4Pa

Heat resistance: 0.02Centigrade/W

Heat transfer rate: >=150w

Best angle of use: 30-60 degree

Max. working pressure: 4MPa

Max. pressure the welding point can bear: 4 Mpa

Temperature range of anti freezing heat pipe: -30Centigrade-300Centigrade

Life expectation 15 years

Warranty 5 years

Tank and Frame Specifications:

1) Volume: 100L, 150L, 180L, 200L, 220L, 250L

Inner tank material and thickness: SUS304 2B /1.2mm

2) Outer shell material and thickness: Color steel/0.5mm OR SUS304/0.5mm

3) Insulation material and thickness: CFC free Polyurethane/55mm

4) Frame material and thickness: Galvanized steel/1.5mm OR SUS304/1.3mm

5) Size of the holes: G1/2 OR G3/4

6) Electrical heater: Available against request, 1500W, 2000W or 3000W

7) Magnesium rod: Available against request

8) Controller: Available against request: SP25, SP26, SPI, SPII, SPIII

9) Guarantee: 3 years for galvanized steel support, 5 years for solar storage tank and evacuated tubes

Working Principle

EVACUATED tubes are the absorber of the solar water heater. They absorb solar energy converting it into heat for use in water heating. Evacuated tubes have been invented in China by Professor Yin Zhiqiang and have already been used for years in Germany, Canada, China and the UK. There are several types of evacuated tubes in use in the solar industry. Skylight uses the most common "twin-glass tube". This type of tube is chosen for its reliability, performance and low manufacturing cost.

EACH Skylight evacuated tube consists of two glass tubes made from extremely strong borosilicate glass. The outer tube is transparent allowing light rays to pass through with minimal reflection. The inner tube is coated with a special selective coating (Al-N/Al) which features excellent solar radiation absorption and minimal reflection properties. The top of the two tubes are fused together and the air contained in the space between the two layers of glass is pumped out while exposing the tube to high temperatures. This "evacuation" of the gasses forms a vacuum, which is an important factor in the performance of the evacuated tubes.