Compact Pressure Solar Water Heater - DIYI-P01-24

Compact Pressure Solar Water Heater

DIYI-P01Series with assistant tank

Characteristics & Advantage:

DIYI offers a range of high quality tanks designed especially for "Pre-heating". These tanks can be used in combination with existing electric/gas mains pressure water heaters, or even as stand alone low pressure hot water systems with the addition of electric elements or external gas boosting.

Ideal for use as low pressure thermal stores, the DIYI pre-heating is available with the addition internal coil heat exchanger.
DIYI “Pre-heating” solar water heater provide mains pressure via a high efficiency copper coil heat exchanger located within the tank. The way in which the mains pressure solar collector heats water is the same as the non-pressure solar collector. Rather than using the water in the tank directly as the non-pressure does, the type uses a 45m-60m copper coil. A heat exchanger inside the tank provides more than 1.2m ² of heat transfer area.
When cold water flows through the coil it absorbs heat from the water inside the pre-heating tank. The tank is therefore a thermal store.

1.Output water temperature is stable,so it is very comfortable and safe to use

2.Hot and cold water flow is seperated

3.The copper coil is with high quality and high grade material

4.Easy to operate,reliable to use and intelligent to work

Technical Parameters:

1. Inner tank: Ø360mm/SUS 304-2B /1.2mm

Outer tank : Ø460mm/Galvanized steel /0.35mm

2.Vaccum tube:58*1800,2.0mm thickness ALN/AIN-SS/CU coating

3.Frame:Dual-purpose frame for both flat and inclined roof galvanized steel 1.5mm

4.Capacity of water tank 100L-360L

5.Pressure:0.6Mpa

6.Insulation:50mm of high density polyurethane foam -Heat preservation:72hrs

7.Copper coiler :Ø12mm with thickness 0.8mm

8.Hail resistance:40mm

9.Guarance: Full system for 5years,tube for 15years

Item No Solar VaccumTube specification

DIYI-P01-20 Ø58mm*1800mm*20

DIYI-P01-24 Ø58mm*1800mm*24

DIYI-P01-30 Ø58mm*1800mm*30

DIYI-P01-36 Ø58mm*1800mm*36

Principle of operation

Remark:

Operation fluid pressure: 0.4Mpa

Coil connection(inch): 1/2

Vent connection(inch): 1/2

Assistant tank connection(inch):1/2