Fectures
Multistage adjustable speed : to suit the different quatity required
Pulse switch : conveniently operating at top speed with a single switch
6-ended blade : the process food at various angles
Enormous unbreakable and compression - resistant jar
Double safety protection : circuit breaker and motor temperature fuse
Motor :220V / 50Hz / 1500W
ABS base : excellent shock absorbance
Materials & Parts
Base : Acrylonitrile Butadiene Styrene (ABS)
Jar & Button : Food grade transparent polycarbona
Blades : harden stainless steel
Operation
The operation for different food processes varies and can be categorized into three as the following :
A. DRY PREPARATION (For dried herbs, coffee bean, nuts, grains, rock sugar, etc)
Ensure that the power switch is at ''OFF'' position.
place the dry food(s) in the jar and mount the jar onto the main base motor by fixing the male end underneath the jar into the female end on the platform of the base. Make sure that the four protruding rubber ends are covered by the jar
Cover the jar with the silicone rubber cap and insert the mixing pole through the hole in the cap
Pull the Pulse level upward for top speed grinding and hold for 3 to 5 seconds.
For further grinding to the required fineness, turn the speed adjuster between '' MAX'' and ''MIN'', switch the power on by pushing the level upward to ''ON''. Stir the jar content is inconsistent.
Press downward the power switch to ''OFF'' position when the satisfactory powder is obtained.
B. WET PREPARATION (For fruits, vegetables, etc.)
Ensure that the power switch is at ''OFF'' position.
Pour in the jar some liquid, should it be water, milk, honey, etc.
Place first the wet food(s) in the jar with the highest water content at the bottom, and the lowest and the hardest on the top. If there is any ice cubes, they should on the top.
Mount the jar onto the main base motor by fixing the male end underneath the jar into the female end on the platform of the base. Make sure that the four protruding rubber ends are coveredby the jar.
Cover the jar with the silicone rubber cap and insert the mixing pole through the hole in the cap
Pull the Pulse level upward for top speed grinding and hold for 3 to 5 seconds.
For further grinding to the required fineness, turn the speed adjuster between ''MAX'' and ''MIX'', switch the power on by pushing the level upward to ''ON''. Stir the jar content is inconsistent.
Press downward the power switch to ''OFF'' position when the satisfactory is obtained.
C. ICE BLENDED DRINKS / ICE CUBE CRUSH (for coffee, cocoa, almond powder, etc.)
Ensure that the power switch is at ''OFF'' position.
Place the ice cubes in the jar, pour in the jar some liquid, should it be water, milk, honey, syrup, etc.
Put in some coffee, cocoa, almond powder, juice or others as you like into the jar.
Mount the jar onto the main base motor by fixing the male end underneath the jar into the female end on the platform of the base. Make sure that the four protruding rubber ends are fitted securely to the base of the jar.
Cover the jar with the silicon rubber cap & insert the mixing pole through the hole in the cap.
Pull the ''PULSE'' level upward for top speed grinding and hole for 3 to 5 seconds. Repeat this step until all ice cubes are crushed.
Turn the speed adjuster at any location to ''MIN'' position, switch the power on by switching the level upward to ''ON'' position until the crushing noise is consistent. The speed may be increased for finer particles. Stir the jar content with mixing pole if it is in consistent.
Press downward the power switch to ''OFF'' position when the satisfactory particle size is obtained.
For ice cube crush - just place the ice cubes into the jar with a little water. (Procedure for using the blender please follow as above)
Cautions
Make sure the power switch is at ''OFF'' before connecting the plug into a socket.
Ensure the jar is in place on the main base securely before switching on the power switching or pulling upward the Pulse level.
Hold the jar when the powerful motor is started
Never place any hard material, e.g.wood, metal, glass, plastics, into jar and operate the blender.
Allow space on both sides and the front for good ventilation.
Clean the jar, mixing pole, cap and button every time after use.
Clean the main base with base with a damp cloth and never immersed the unit in water.
Unplug the blender when the work is done.
Never operating the blender continuously for more the 3 minutes, It must be subjected to rest for 1 minute after 3 minutes operation.
The motor temperature thermostat is set to stop at a motor temperature of 125oC and above.
Do not try to dismantle the main base for whatever reason. Repair is only done by qualified personne.
Troubleshooting
Solution : Press the circuit breaker (at the rear of the main base) to reset and switch the unit on again.
Solution : Wait for 10 minutes and try switch it on again as the motor temperature may exceed
Solution : Make sure there is no power failure. If there isn't, send it to qualified personnel for repair