Cartridge heater

1.I make dimensions, the electric capacity by custom tailoring.Tell the specifications of the demand.
2.The shape is with L-form, a flange, too and tailor-makes sensor incorporation.
3.I hear the production of a soaking cartridge heater enabling uniform heating.
4.I hear the production of a cartridge heater for high temperatures.
5.I perform the choice of the heater from an electric capacity calculation if I have you teach a heating thing and a heating condition.

Notes on use

1. Please do not bake the heater.

It causes excessive heat generated by the use of break out from the heated state is also part of the heater heating section, please use the heater will be heated to a completely non-adherence.

2.Can cause breakage and repeatedly bend the base of the lead.

Is due to the flexing of the many root causes of burnout.

When your moving parts, please use it to move the lead base.

3.Please use the water environment and not take the lead of the heater.

This may cause leakage or short.

4.Rated voltage (V), rated capacity (W) Please do not use above.

5.When you disconnect from the heater is heated, then please make sure the power is turned OFF.

Also, immediately after power OFF and the heater is hot, has cooled down enough it may cause burns if touched, please remove it.

6.Before use, please remove the moisture.

Insulators are used in the heater is easy to absorb moisture magnesia (magnesium oxide), we use the.

As the rainy season and, if not used in such a long time may lower the insulation resistance of electric shock.

Below the heater rated voltage, please use the insulation will recover from the card in a drying oven or heated at about self-healing to more than 100 °C to evaporate moisture.

The storage heaters, etc. Please pay attention enough to contain desiccant.