Heat pipe solar collector
No water inside.heat transfered by heat pipe. can be work well under extremely cold condition
Port: Shanghai
Minimum Order Quantity: 3 Set/Sets
Supply Ability: 1000 Set/Sets per Week
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: Standard export package
Delivery Detail: within 10 days
Manifold Casing Material:1.6mm thickness /Aluminium
Frame Material:1.5mm thickness /Galvanized or Aluminium
Header Pipe Material:1.2mm thickness /Copper
Insulation:Polyurethane /Rock wool
Rubber Seals and Rings:UV stabilized high temperature silicone rubber
Optimal installation angle:30-70°Vertical,0°Horizontal
Operating Pressure:6bar-12bar
Pressure:Drop 7bar 3.3L/min for 20 tube manifold
Optimal flow rate:0.1L/min/tube-0.026G/min/tube
Features:
1,Reliable and efficient twin-glass solar tube
2,Copper heat pipes for rapid heat transfer
3,Easy plug in installation
4,Free maintenance
5,Suitable for mains pressure water(up to 8 bar/116psi)
6,Corrosion resistant silver brazed copper header
7,All stainless steel frame(304 2B grade)
8,Powder coated(black,brown or silver)aluminum casing
9,Stable solar conversion during the day(tubes passively track the sun)
10,The perfect solar collector for domestic solar water heater systems
11,Ideal for big project like swimming pool,school,hotel......
How it works:
1,The operation of the solar collector is very simple
2,Solar absorption:solar radiation is absorbed by the solar tubes and converted into heat
3,Solar heat transfer:heat pipes conduct the heat from within the solar tube up to the header pipe
4,Solar energy storage:water is circulated through the header,via intermittent pump cycling.Each time the water circulates through the header,the temperatures is raised by 5-10°C.Throughout the day,the water in the tank is gradually heated.
Solar collector material and thickness | Aluminium alloy,thickness 2.0mm Stainless steel 304-2B,thickness 0.8mm |
Header pipe material and thickness | Dia:32mm copper pipe thickness 1.0mm |
Heat pipe material and thickness | Dia:14mm,copper pipe thickness 0.5mm |
Insulation material | Polyurethane 50mm or rock wool |
Test pressure and work pressure | 9 bar,,normal work pressure 6 bar to 8 bar |
Frame materials and thickness | Aluminum alloy,thickness 2.0 mm Stainless steel,thickness 1.2mm |
Collector mounting way | Flat roof/titled roof |
Inlet and outlet dimension | 1/2" or 3/4" |