1. Button type thermal protector for transformer and coil
2. Small size, high reliability
3. Both NC and NO available
Port: Shenzhen
Minimum Order Quantity: 2000 Piece/Pieces
Supply Ability: 100,000 Piece/Pieces per Day
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: 10000 pcs per paper carton, carton size: 17cm * 20cm * 31cm
Delivery Detail: 15 days
TS01-3 Button type thermal protector is snap action and bimetallic thermal protector. When the applications are overheated or operated abnormally, the heat will be conducted to bimetal which cause the temperature to reach the calibrated value. Then, the contacts of button type thermal protectors will open or close the circuit. When temperature is lowered down, the contacts will close or open again.
* Special Features of button type thermal protector:
1. Small size, diameter of sensing head is 8mm only; easy for mounting;
2. Both Nomally closed and Normally Open contacts are available;
3. Automatic reset;
4. Snap Action
* Electrical Ratings of button typer thermal protector:
1. 250VAC: 3A
2. 125VAC: 6A
3. 24VDC: 6A
4. Contact Resistance:<30mΩ
5. Insulation resistance: 2KV
* Temperature ratings and range:
1. Action temp: 60~200°C
2. Tolerance of Action temp: ±5°C;
3. Reset temp: 1/3 lower than action temp;
4. Tolerance of reset temp: ±15°C
* Applications of button type thermal protector:
1. Transformer;
2. coil
3. Motor
4. Heating element