1. Thermal switch for heating pad, motor, lighting
2. Low temperature 0~50 C available
3. Snap or creep action optional
Price Terms:FOB,CIF,EXW
Payment Terms: T/T,Western Union,MoneyGram,L/C
Minimum Order: Negotiatable
Delivery Port: Customized
Contact SupplierPackaging Detail: 5000 pcs per paper carton, each carton size: 41cm * 26cm * 28cm
Delivery Detail: 10 days
17AME series bimetal thermal switch is specially designed for heatings, lightings and motors. Based on the principle of bimetal heat expansion and cold contraction, the thermal switch can control the temperature of application under a very small range. For temp limiting or safety protection purpose, it also has a very good performance. It can also alternate Klixon 7AM or 17AM.
Meanwhile, our bimetal thermal switch has perfect quality consistence and has been approved by many famous customers in the world, like Welling motors, Johnson Electric, Samsung, Sanyo etc.
* Special Features of thermal switch:
1. Temperature is 100% calibrated
2. Both Snap Action and creep action are possible
3. Type and length of wires are optional
4. Terminals can be same or opposite end
5. 100% comply with RoHS
6. 100,000 life cycles
7. LOW TEMPERATURE SETTING 0-50°C available.
8. MAX TEMPERATURE 180°C available
* Electrical Ratings:
1. 20A / 120V AC
2. 10A/ 230V AC
* Temperature Ratings:
1. Off temperature: 0-180°C
2. Tolerance:±5
3. ON temperature: 5°C for creeping action;
20°C for snap action
* Special notes for thermal switch:
1. The temperature rising speed under calibration should be less than 1°C per 2 minutes;
2. Vacuum varnishing is not applicable. Specially treated thermal switch is possible;
3. Varnishing under room temperature is possible. The temperature has to be less than 70°C;
4. If the contact resistance is over 50m Ohm, please connect the thermal switch to the circuit of 60-100VAC, 2-5A and make the thermal switch to action 2 or 3 times. Then, test the contact resistance again. The resistance would be decreased.
* Applications:
1. Motors, transformers and appliances
2. Pumps, Heating and lightings
* Certifications:
1. UL&CUL: E309992
2. CQCCQC07002018912
3. VDE: 40017383
4. CB: DE1-34606
* Dimensions:
* Testing curve
Other products we are making:
| |
| |
| |
| |
| |
| |
| |
|