Air to water heat pump
Stainless steel cover design
More than 4 times energy saving
bottom heater could be equipped
Price Terms:FOB,CIF,EXW
Payment Terms: T/T,Western Union,MoneyGram,L/C
Minimum Order: Negotiatable
Delivery Port: Customized
Contact SupplierPackaging Detail: Qualified wooden case
Delivery Detail: 20 days per 20' container
Advantages of Air source heat pump water heater---4.83KW
1 May be used to heat air, or water.
2 Clitech air source heat pump can provide fairly low cost space heating and 60 DegC hot water, can connect to under floor heating, radiator and water tank, with high efficiency this heat pump can provide more than four times the heat compared to an electric heater.
3 As an electric system, no flammable or potentially asphyxiating fuel is used at the point of heating, reducing the potential danger to users, and removing the need to obtain gas or fuel supplier.
4 Branded components are adopted for clitech high efficiency heat pump.
5 LCD intelligent controller.
6 Technical Parameters
Air Source Heat Pump Water Heater CAR-05 | |||
MODEL | CAR-05 | ||
Rated heating capacity | KW | 4.83 | |
BTU | 16485 | ||
Hot water supply | T/h | 0.1 | |
Heating input power | KW | 1.15 | |
Rated heating input current | A | 4.71 | |
COP | 4.2 | ||
Output water temperature | °C | 60°C | |
Power Supply | V/Hz | 220V-240V/50HZ | |
Noise | dB(A) | 48 | |
Unit size | W*D*H | mm | 930*280*550 |
Packing size | W*D*H | mm | 1030*380*650 |
Unit weight | KG | 75 | |
Throttle type | Electronic/thermostatic expansion valve | ||
Refrigerant type | R410A | ||
Compressor | Type | Rotary | |
Quantity | pcs | 1 | |
Air source heat exchanger | Type | Finned heat exchanger | |
Quantity | pcs | 1 | |
Fan type | Axial big twist Angle fan | ||
Motor power | KW | 0.04 | |
Hot water side heat exchange | Type | Efficient tube in tube heat exchanger | |
Water flow | m3/H | 0.84 | |
Water pressure down | kPa | 20 | |
pipe size | DN | 20 | |
Max working pressure | kPa | 1000 |
Test conditions of above parameters:dry bulb temp is 20DegC. wet buld temp is 15DegC. input water temp is 15 DegC. output water temp is 55 DegC.