air to water heat pump
R410A gas
high COP
designed for family use
Price Terms:FOB,CIF,EXW
Payment Terms: T/T,Western Union,MoneyGram,L/C
Minimum Order: Negotiatable
Delivery Port: Customized
Contact SupplierPackaging Detail: Qualified plywood case
Delivery Detail: 20 days per 20' container
This CAR-05 air source heat pump is special designed for all year around sanitary hot water supplied.
An air source heat pump uses outside air as a heat source or heat sink. A compressor, condenser and refrigerant system is used to absorb heat at one place and release it at another.
1 Pressurized system design to keep hot water at consistant temperature all the time.
2 100% water circulation of the air source heat pump design
3 Electric protection class IPX4
System introduction:
1 Rotary compressor inside.
2 Compact structure, easy demountable for access.
3 Environment friendly refrigerant of R410A is available.
4 Intelligent controller adjustment by quickmind microprocessor.
5 Four way directional valve.
6 Careful protections like high/low pressure protection, water flow switch protection, overheating protection, overload protection and so on.
7 Fault self-checking function.
8 Automatic defrosting and antifreezing function.
Product options:
Bottom heater function;
Parameters:
Classic air to water heat pump CAR-05 | |||
CAR-XB | CAR-05 | ||
Rated heating capacity | KW | 4.83 | |
BTU | 16485 | ||
Hot water supply | T/h | 0.1 | |
Heating input power | KW | 1.15 | |
Rated heating input current | A | 4.71 | |
COP | 4.2 | ||
Max output water temperature | C | 60°C | |
Power Supply | V/Ph/Hz | 220V-240V/1N/50HZ | |
Noise level | dB(A) | ≤48 | |
Unit size | W*D*H | mm | 930*280*550 |
Packing size | W*D*H | mm | 1030*380*650 |
Unit weight | KG | 75 | |
Working temperature range | C | minus 20 to 43°C | |
Throttle type | Electronic expansion valve | ||
Refrigerant type | R410A | ||
Compressor | Type | Rotary(Panasonic) | |
Quantity | pcs | 1 | |
Air source side heat exchange | Type | Finned tube heat exchanger | |
Quantity | pcs | 1 | |
Fan type | Axial big twist angle fan | ||
Motor power | KW | 0.04 | |
Hot water side heat exchange | Quantity | Efficient tube in tube heat exchanger | |
Water flow | m3/H | 0.84 | |
Security functions | kPa | 20 | |
pipe size | DN | 20 | |
Max working pressure | kPa | 1000 |
Test conditions of above parameters:dry bulb temp is 20DegC. wet buld temp is 15DegC. inlet water temp is 15 DegC. outlet water temp is 55 DegC.