Air biological sampler - FKC-1

It is a kind of high effective air biological sampler with multi-hole.It is designed according to the principle of particle bombardment and isokinetic sampling,keeping wind speed of sampling and that of clean room consistent basically,and reflecting consistence of animalcule in clean room more truly.When sampling,air with puffall will be bumped on agar surface of substrate uteensil though tiny hole;these animalcule grow quickly in the course of substrate,thus,the result will be got quickly.

This instrument is novel,with up and down two parts.The upside is sampling hole,sampling pedestal and gas pump while the downside is controller and batteries. Sampling pedestal and crust adopt quality aviation aluninum,surface close hole processing and is convenient to sterilize and disinfect before using, This instrument is of large sampling capability,stable perfoemance,simple operation and reaches international level of similar prduct. It is an ideal air biological sampler for medicine plant,hospital, biological products,food machining,public and other examination departments.

Use of environmental

1. Temperature :10 - 35
2. Relative humidity 10 - 90% RH
3. Atmospheric pressure 80-110kPa
4. Maximum dust concentration: 100 million / m³ @ 0.5μm or 0.2mg / m³
5. Maximum wind speed 1m / s

The main characteristics and parameters:

1. Sampling head for the numerous porous, so that uniform distribution of micro-organisms in the agar surface, reducing the duplication of dust bacteria and reduce the microbial count error.
2. Sample floW 100L/min.
3. Sampling flow rate of the first population 0.38m / s and the clean room is basically the same as the wind speed (isokinetic sampling).
4. Sample volume can be from 0.01-2.0m ³ arbitrary.
5. Petri dish using a standard GM Φ90 * 15
6. Power AC-DC dual-use, rechargeable battery DC6V, filling a row after the wires for the work of 4h.
7. Dimension Φ120 * 300.
8. Weight 2kg

Structural features

1. Sampling head for the numerous porous, so that uniform distribution of micro-organisms in the agar surface to reduce the structural features of note
1. Sampler is composed of two parts from top to bottom, for sampling the upper part of head, dish Block, sampling pumps, sampling pump, Block, sampling pump power. Lower for the control panel, memory, LCD display, keyboard, battery components, see fig.
2. Sampler can be AC-DC dual-use, after the equipment has a switch and the bottom of a jack (see Figure), when DC use open switch from battery-powered; when the exchange will use a random configuration of the 6V DC power jack to insert the above-mentioned, When the switch is not opened in a state-of-charge at this time, when the switch is open, by the 6V power supply and maintain state-of- charge.