5 stage household RO system with LED Display - KD-RO303B-50G

5 stage household RO system with LED Display

1-Product Features

(1) Adopting the imported reverse osmosis(RO) membrane and generating water by the

international advanced reverse osmosis technology.Five-stage filtration,eliminating

sand,suspension,colloid,organic substances,heavy metals,soluble solids,bacteria,virus and other

harmful substances,only reserving water molecules and soluble oxygen.

(2) Adopting mute booster pump which has long lifespan and reliable quality.

(3) Replaceable pre-treatment filters,ensuring effective pre-treatment,convenient

replacement ,completitive price of filtr replacement ,low operating cost of water generation.

(4) Reverse osmosis system has the function of automatic flushing.It can flush the RO membrane

at the time of start-up and re-start,effectively prolonging the service life of RO membrane

(5) Automatic control of water generation(stop automatically in case of full water in pressure

tank,flush the RO membrane automatically for protection).

2-Specificaton:

(1)Capacity: 50GPD

(2)Flush type: manual/automatic flush

(3)Power supply:110V/220V , 60Hz /50HZ
(4)RO membrane: JCM Brand(own brand membrane) or CSM
(5) Booster Pump: pump with adaptor(Nesca/Jeak/Dengyuan)
(6)Fitting type: JACO
(7)Pressure tank: 3.2 gallon plastic tank

(8)Faucet, Wrench, Tubing all Included

(9)RO system with LED Display

2-Filteration Stages:

3- Schematic diagram:

4-Precautions:

(1) Never place the water purifier in a direct sunshine

(2) Move the machine carefully and lightly.

(3) The water purifier shall operate at a temperature of 5-40°c,and must not filter hot

water,otherwise this may cause damage;in winter,pay attention to heat preservation and

protect against freeze.

(4) By using a cloth dipped in water,clean the water purifier with soft detergent rather that strong

volatile solvent such as gasoline

(5) In case of failure,disconnect the water source promptly,and see the introduction or ask us.

(6) In case of Long-term no use.pull the power plug,close the feed ball valve and cut off the water

source.

(7) In the cases where the water purifier is used for the first time or resued after long time idle

drain out the first two tanks of water through the goosennect tap after the tank is full,and then

use the machine.

(8) Don’t use a power supply that does not match the related voltage