1.stove,pellet stove
2.With CE certification
3.thermostatic control
4.Automatic Ash-Wash
Price Terms:FOB,CIF,EXW
Payment Terms: T/T,Western Union,MoneyGram,L/C
Minimum Order: Negotiatable
Delivery Port: Customized
Contact SupplierPackaging Detail: wooden case (based on customers' requirements)
Delivery Detail: 30 days after payments
Product Features:
In case of overheating, safety temperature limiter will automatically shut-off the system. After cooling, system must be manually set live again. System to be re-started manually.
1.Automatic Flame Cut-Off
2.Thermostatic Control
3.Automatic Ash-Wash
4.Low Decibel Noise
5.Optional: Radio Remote Control
About Products:
Material: Cast Iron, Thickness: 5-8mm
Dimension: H798mm* W662mm* D635mm Weight: 200kgs
Hopper Capacity: 20kg
Flue Pipe Outlet Diameter: 80mm
Thermal Efficiency: 85%
Nominal Thermal Output: 8kw (27500BTU)
Room Heating Capacity: 73-186m³
Flue Gas Mass Flow: 3.3-6g/s
Flue Gas Temperature(max): 220°C
Draft Type: Second Burning
The Pellet Feeding Qty: 0.24-1.9kg/hr
The Basic Color: Black
With pressing the START button, stove is set to ignite automatically; it will take about 6 min. till pellets start burning.
In case of failure of automatic ignition, fire may be lit manually by inserting BBQ charcoal lighters together with a handful of pellets into the clean burner bowl. Close the door and press ON/OFF to start automatic mode.
ATTENTION! FIRE DANGER!!
Plastic pellet bag mustn’t touch hot stove while re-filling!
Spilled pellets must be collected in order to avoid fire hazard.
In order to prevent fire from extinguishing, make sure to keep a proper filling-level in hopper. Stove may be filled with a 15kg bag if there are less than 2kg left.
Filling-level should be checked regularly.
Hopper lid to be kept closed unless being refilled.
ATTENTION: Always take heat-protection gloves when opening hopper lid!
Before performing any maintenance work, always turn off stove and wait till it’s cooled down. Unplug electricity!
Cleaning intervals depend on quality of pellets and average heating power.
Intervals may be cut in half by moist pellets and high ash and/or sawdust content. Therefore: always use high-quality pellets.