2011 Latest Type flexible Split Solar Water Heater With Exchange
Anti-freezen&pressure
temperature control
Adjustable frame
Port: Shanghai or Ningbo
Minimum Order Quantity: 2 Set/Sets
Supply Ability: 500 Set/Sets per Day
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: standard export carton box
Delivery Detail: 15 working days for container ,7 working days for sample
2011 New Type flexible Split Solar Water Heater With Exchange
| anifold | SUS 304 Food Grade Stainless Steel |
| Frame | Stainless Steel |
| Header Pipe | Copper |
| Insulation | Polyurethane 55mm |
| Rubber Seals and Rings | UV stabilized high temperature silicon rubber |
| Optimal installation angle | 30-70°Vertical,0°Horizontal |
| Maximum Operating Pressure | 6bar-85psi |
| Pressure Drop | 700Pa 3.3L/min for 20 tube manifold |
| Optimal flow rate | 0.1L/min/tube-0.026G/min/tube |
| Performance Data | Conversion Factor: ho=0.717 Loss Coefficients:a1=1.52,a2=0.0085 |
Feature of Split Pressured Solar Water Heater :
1) Collector separates with the storage tank. The tank can be put anywhere of the house.
2) And the collector can be put on both tilted roof and flat roof.
3) Module design, arbitrary combination, harmony with the building perfectly.
4) Intelligent control and automatic operation.
5) Anti-freeze: No water inside the tubes when it works.
6) The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.
7) Multifunction: Bathing, washing, domestic heating.
8) Workable at anytime and enjoyable.
Factory Gallery
Office
QC
R&D
Case
Model No.: LQ-VTU-A0764
Features: Solar Water Heater Copper Fin Tube
1)Widely used for solar water heaters,Insulation layer :Rock wool,
Heat pipe:red copper,OEM
Model No.: EM-R
Features: Stronger wind, snow, acid rain, sea wind erosion, hailstone and other bad weather conditions resistant ability
Model No.: LQ-ZA-a663
Features: Heat Pipe Solar Collector
horizontal solar collector 4 swimming pool is especially 4 larger commercial application
Model No.: KLSNP
Features: inner/outer tank: SUS304 2B, welded by argon arc, water is pure and drinkable,heat insulation adopted polyurethane foam
Model No.: LQ-NPS-A-S45
Features: closed loop solar water heating system 4(EU)
heat collector suit for various building styles
Automatic run,heat a spa,Heating
Model No.: LQ-PC-A58520
Features: High Quality Solar Hot Water Heater Collector
Sunpark split solar water heater collector,more high efficiency and cheaper,OEM
Model No.: KLSUP
Features: pressurized solar watet heater:inner/outer tank: SUS304 2B, welded by argon arc,pressurized solar water heater OEM service
Model No.: SD-G2-20
Features: solar water heater
1.simple structure, easy installation;
2.Efficient heat insulation
3.Reliable performance
4.Cheapest kind
Model No.: KLSNP
Features: solar water heater inner/outer tank: SUS304 2B, welded by argon arc, water is pure,solar water heater is for 5 years, MOQ:5sets
Model No.: LQ-PC-A420
Features: Solar Water Heater Manifold
*Preferred option for extremely cold areas
*The tank can be install anywhere of home
*Offer OEM
Model No.: HQ-05
Features: Heat-pipe Water Heater
Good quality and lower price
Snow load:30cm
Permissible wind:30m/s
Model No.: XSL-P025 U Pipe Solar Collector
Features: U Pipe Solar Collector, is perfect for cold area and working pressure can bear 0.6Mpa