2010 Inox Solar Water Heater - LQ-PS-A0100

Inox Solar Water Heater

Inner tank: 1.material:food grade stainless steel SUS304

2.thickness: 1.2mm~1.5mm,seal the tank by argon-arc welding

3.work pressure 0.6Mpa,test pressure:0.9 Mpa

4.copper coil in tank: Red copper(Ø=12mm and thickness:1.0mm)

5.qty of copper coil: Single or double coils both available

Outer tank: 1.color steel with anti-corrosion layer&thickness: 0.4mm; (Option: stainless steel ), cut and punching by numerical control machine

insulation:

2constant temperature workshop at 25 degreem,avoid secondary foaming process.

3.density:30kg/m3,thickness over 50mm,keep the water hot for 100 hours

collector: 1. Outer board: aluminum-alloy ,thickness 2.0mm;

2. Internal bladder: cooper pipe (φ35*1)

3. Insulation layer: mineral or rock wool &thickness:35mm;

4. Bracket: Aluminium-Alloy , thickness1.5mm;

5. Vacuum tube :Transition heat-pipe tube with φ0.5mm copper tube inside;

6. Absorption: 93%; Emittance: 5%;

7. Hail Resistance : 25mm

8. Freeze resistance: >-40C

Advantage

Regardless of the weather
High efficiency due to high temperature reached by the "Heat Pipe" system along with reduced thermal heat loss due to the vacuum exerted, guarantees its operation in cloudy weather or at low temperatures. Also, the absorber in cylindrical form ensures the collection; both direct radiation and diffuse radiation.

Best of the Best
High quality and corrosion resistant materials provide a safe system with long service life and minimum maintenance. It presents an attractive and modern exterior design.

A great selection
Great versatility, since high temperatures obtained allow its application in home use (domestic hot water, heating and swimming pools) and industrial use.

Keep it simple
Easy installation on flat roofs, sloping surfaces or facades.

Heat but do not burn
Tubes reach a limited temperature which protects the system from overheating..